Monday, May 7, 2012
Motorola Maxtrac 5-pin Accessory Jack
Monday, April 30, 2012
UniTrunker Logfile Merging
Prior to running the batch file, all of the needed files need to be placed in the same directory. These include:
msxsl.exe (which can be downloaded from Microsoft's website)
UTC.exe (the program file which I wrote to perform the merge)
UTMerge.bat (the batch file which calls all the programs and converts files to correct filetypes)
UTxsl.bat(the batch file which calls the msxsl.exe to apply the xsl stylesheets)
UTlog.bat(the batch file which calls UTC.exe program to create a merged log file)
System.xml (this file is exported by going to the systems tab in UniTrunker and exporting the desired system)
users.xsl, groups.xsl, sites.xsl which I have created/modified based on the example from the UT website
UniTrunker-********.LOG file (created daily by UniTrunker and archived to a gzip file)
-Note this file needs to be unzipped in order for the batch file to work
Once all the files are in the same directory, simply change directories to the location of the files, and then type "utmerge" to call the batch file.
The user will be prompted to enter the name of the .xml file. Case doesn't matter, but be sure to type it correctly. After a few seconds of processing the user will be prompted for the date of the logfile to be merged. After a few more seconds a text file with the merged data will be created in the same directory.
A zip file of the required files can be found here:
UniTrunker Merge Program files
Download and extract the UTMerge.zip file to an accessible location. Then extract a system.xml file from UniTrunker. Copy or move a .LOG file from UniTrunker's logfiles to this same directory. You can go to Run...and type CMD to open a DOS window. Then change directories to the location of your UTM files and type utm to run the batch file.
An easier way is to use windows explorer to browse to the directory and double click on UTM.bat. The program will run in a popped-up DOS window. Carefully type in the information required when prompted, and VOILA, a merged log file will be created!
UPDATE:
I created 2 additional .bat files:UTxsl and UTlog. The UTmerge file can still be used successfully. However, each time it runs it creates the same users.txt, group.txt, and sites.txt files. This does no harm, but is redundant and takes time. I spilt the processes into 2 batch files. The first to be run should be UTxsl. This will apply the xsl stylesheet once and create the necessary .txt files. After these are created, there is no need to run this batch file again unless changes are made in UniTrunker to your system files and subsequently exported.
The second batch file to be run is UTlog. This simply prompts for the date of the log file you would like to merge with the users and groups files. It can be run multiple times on logs for different dates without recreating the users.txt and groups.txt files.
UPDATE 2 (February 23, 2013)
After looking for a way to further process the merged log files, I realized the Linux grep command was perfect for looking through logs to isolate individual users or groups or both. This means I either have to run a grep program on my Windows computer, or move the files to my Linux computer to further process them. It is a little cumbersome to have to move files to a different platform, but the power to sort the data makes it worth doing.
The power of the the grep command in dissecting the large amount of information in one days' log file is impressive. For example, after a recent fire department response to a building fire, I sorted the log files based on the fire departments operations channel to see just the calls for the fire separate from the 1000's of other calls on the TRS for the day.
For a better explanation of the grep command see:
http://en.wikipedia.org/wiki/Grep
A sample output from a TG sort using the command:
~$ more UT20130220merged.txt | grep 10848
20130220210159,2,Call,I,32092,Engine 85,G,10848,Davis Ops 6 - South Davis Metro Fire (Bountiful fire response),488, -
20130220210242,2,Call,I,32014,Ambulance 83,G,10848,Davis Ops 6 - South Davis Metro Fire (Bountiful fire response),525, -
20130220210247,2,Call,I,32014,Ambulance 83,G,10848,Davis Ops 6 - South Davis Metro Fire (Bountiful fire response),497, -
20130220210256,2,Call,I,32031,Engine 85,G,10848,Davis Ops 6 - South Davis Metro Fire (Bountiful fire response),498, -
20130220210300,2,Call,I,32014,Ambulance 83,G,10848,Davis Ops 6 - South Davis Metro Fire (Bountiful fire response),498, -
Friday, April 20, 2012
Great Utah Shake Out Mock Disaster Audio
Davis County Disaster Talkgroup Audio
Great Utah Shakeout 2012
The county has a nice radio setup with capabilities on many different modes from CW to packet and band capabilities from HF to UHF. Area repeater coverage was also excellent with contacts from the North end of the state to the South end. Seeing how a good station like K7DAV is put together even gave me some ideas for improvements for my own shack.
Wednesday, November 16, 2011
Maxtroller and Maxduino
Instructions Update
Original Unmodified Code
Code Modified to Use Maxtroller Squelch
Code for Maxtroller Discrimator Audio Parking
I won't repeat these instructions here since they are well-written. There were a few differences between my 5-pin Maxtrac radios and the 16-pin Maxtrac radios used in the instructions, but the differences were resolved by comparing my radio's board and the pictures of the16-pin's board. The biggest software change I made was to wire the CSQ "squelch" circuit to the Arduino and use it to mute and unmute the Maxtrac. Without this change I was getting very long squelch tails (up to 2 seconds) that were fairly intolerable. Now the squelch tail is fairly tight and a lot less noticeable.
For my first attempt at building the Maxdunio, I crudely cut a slot in the back of the radio and ran the wires out to the Arduino. The second time I placed an RJ-45 jack in the side of the front cover next to the speaker. This allowed for an easy, clean connection to the Arduino or my homebuilt Maxtroller with an ethernet cable.
Here is the base of my Maxtroller box with a Radio Shack "Dual General-Purpose IC PC Board." I used this for both the button circuit and the discriminator audio circuit to add a resistor and capacitor inline with the audio.
Thursday, September 22, 2011
Uniden BC890XLT Discriminator Tap
Last week I bought a used Uniden BC890XLT scanner and added a discriminator audio tap. Here's how I did it:
The first thing to do was open the case. The outer sleeves come apart on the top and the bottom. There are 2 screws on each side and one screw on the back that I removed. I took both the top and bottom sleeves off to explore the inside, and discovered I only needed to remove the top to tap the discriminator audio. Once inside I found the location of the discriminator audio which is pin #10 of IC #3, 3359DA. Pin #10 is on the top right corner of the chip:
Rather than solder to the chip, I preferred to solder to the lead to the resistor at TP3 which is connected directly to PIN #10 of the IC. I put a 10K ohm resistor in series with a 10 μF tantalum capacitor.
I wanted this modification to be removable so I didn't drill a hole in the case. Rather, I ran a connected wire to the outside of the case through an opening in the side of the case.
I then ran the wire in the space between the case and the outer sleeve on the side. I then ran it around the corner to the back of the scanner. I connected the ground wire to the chassis via the screw that holds the accessory RCA jack. I put heat shrink tubing on the outside of the wires and connected them to a 1/8" mono phone jack.
Radio Shack Part Numbers:
1/4-Watt 10K ohm resistors - #271-1335
10μF Tantalum Capacitor - #272-1436
1/8" Mono In-line Phone Jack - #274-0333
Assorted Heat Shrink Tubes - #278-1627
Thursday, July 21, 2011
Saying goodbye to a good friend
It is hard to witness history as the Space Shuttle Program comes to an end. While I was never a direct participant in the program, I owe a lot to the Space Shuttle Program for who I am today.
I was four years old when Space Shuttle Columbia launched on STS-1 in 1981. I remember sitting with my parents in our living room watching on TV as the orbiter landed on the dry lakebed at Edwards Air Force base and thinking how cool it would be to be an astronaut and fly on a vehicle like that.
Days and years passed, and as much as I could, I would follow the Space Shuttle program through triumph and tragedy. I enjoyed classes and units at school on space and the U.S. space program. Hanging on the wall in my bedroom throughout elementary school, middle school, high school, and even part of college was this picture on a poster of the launch of STS-1 that I would look at when daydreaming of becoming an astronaut or a pilot.
In the end I chose a school and career path that led me to become an airline pilot, but the roots of my interest in science, math and aviation came from watching the Space Shuttle in all of it's power, majesty in ascent and grace on entry and landing. I hope that there is another vehicle to inspire my children to work hard to pursue their dreams.
So, farewell Columbia, Challenger, Discovery, Atlantis and Endeavour. I thank you. Fair winds and following seas.

